-
Series AEP188L HIGH-VOLTAGE CYLINDRICAL RESISTORS
The series employs our special METOXFILM, which demonstrates excellent stability and a wide resistance range. Power and voltage ratings are for continuous operation and have all been pretested for steady-state performance as well as momentary overload conditions.
■up to 48 KV operating voltage
■Non -inductive design,
■ROHS compliant
■High operating voltage , The stability good
■Application for Electronic Transformer
■Voltages up to 60% higher than the values listed – “S“-Version
-
Series EVT/ZW32-10 Voltage Transformers
Series EVT/ZW32–10 voltage transformers is a new type of high voltage measurement and protection transformers, mainly matched with outdoor ZW32 vacuum circuit breaker. The transformers has powerful functions, the small signal output ,don’t need secondary PT conversion, and can be directly connected to secondary equipment through A/D conversion, which meets the development of “digital, intelligent and networked” and “integrated automation system of substation”.
Structural features: The voltage part of this series of transformers adopts capacitive or resistive voltage division, epoxy resin casting, and a silicone rubber sleeve
-
Series MXP 35 TO-220
35 W Thick Film Resistor for high-frequency and pulse-loading applications
■ 35 W operating power
■ TO-220 package configuration
■ Single-screw mounting simplifies attachment to heat sink
■ Non-Inductive design
■ ROHS compliant
■ Materials in accordance with UL 94 V-0 -
Series LXP100 /LXP100 L TO-247
100 W Thick Film Resistor for high-frequency and pulse-loading applications
Version L for pin lengthening type
■100 W operating power
■TO-247 package configuration
■Single-screw mounting simplifies attachment to heat sink
■Non-Inductive design
■ROHS compliant
■Materials in accordance with UL 94 V-0
-
Series RHP 150 Power Resistor
This unique design allows you to use this elements in the following areas: variable speed drives, power supplies, control devices, telecommunications, robotics, motor controls and other switching devices.
■1 x 150 W / 2 x 75w / 3 x 50w operating power
■TO-227 package configuration
■Non-Inductive design
■ROHS compliant
■Materials in accordance with UL 94 V-0
-
Series RHP 200 Power Resistor
This unique design allows you to use this elements in the following areas: variable speed drives, power supplies, control devices, telecommunications, robotics, motor controls and other switching devices.
■1 x 200 W / 2 x 100w / 3 x 67w operating power
■TO-227 package configuration
■Non-Inductive design
■ROHS compliant
■Materials in accordance with UL 94 V-0
-
Series SUP300 High Power Resistor
Mainly used as a snubber resistor to compensate the C-R peaks in traction power supplies. Furthermore for speed drives, power supplies, control devices and robotics. The easy mounting fixture guarantees an auto-calibrated pressure to the cooling plate of about 300 N.
■300W operating power
■Non-Inductive design
■ROHS compliant
■Materials in accordance with UL 94 V-0
-
Series SUP800 High Power Resistor
Mainly used as a snubber resistor to compensate the C-R peaks in traction power supplies. Furthermore for speed drives, power supplies, control devices and robotics. The easy mounting fixture guarantees an auto-calibrated pressure to the cooling plate of about 300 N.
■800W operating power
■Non-Inductive design
■ROHS compliant
■Materials in accordance with UL 94 V-0
-
Series SUPT400 High Power Resistor
For variable speed drives , Power supplies,control devices,robotics,motor control and other power designs, the easy mounting fixture assures a pressure of the cooling plate of about 300N.
■400W operating power
■Non-Inductive design
■ROHS compliant
■High insulation & partial discharge performance
■Materials in accordance with UL 94 V-0
-
Series SUP600 High Power Resistor
Mainly used as a snubber resistor to compensate the C-R peaks in traction power supplies. Furthermore for speed drives, power supplies, control devices and robotics. The easy mounting fixture guarantees an auto-calibrated pressure to the cooling plate of about 300 N.
■600W operating power
■Non-Inductive design
■ROHS compliant
■Materials in accordance with UL 94 V-0
-
Series SHV Resistor
The series employs our special METOXFILM, which demonstrates excellent stability and a wide resistance range. Power and voltage ratings are for continuous operation and have all been pretested for steady-state performance as well as momentary overload conditions.
■up to 48 KV operating voltage
■Non -inductive design,
■ROHS compliant
■High operating voltage , The stability good
■Application for Electronic Transformer
■Voltages up to 60% higher than the values listed – “S“-Version
-
Series JCP Resistor for Electronic Transformer
The series employs our special METOXFILM, which demonstrates excellent stability and a wide resistance range. Power and voltage ratings are for continuous operation and have all been pretested for steady-state performance as well as momentary overload conditions.
■up to 100 KV operating voltage
■Non -inductive design,
■ROHS compliant
■High operating voltage ，The stability good
■Application for Electronic Transformer
- 0086-13590245275
- highpreciseX@gmail.com
